Lead Sheet
* Laboratories as a precaution against radiation. hospitals. in dental and veterinary clinics.
* Roof coverings of flat and sloping places for use in construction works. Roofing of mosques. Wall skirts. ditches. Railings.
* Acid tanks to protect from corrosion. Lead sheet fabrication for acid discharges and all detailed lead work; X-RAY As it is well known, X-ray . In case of uncontrolled and undirected contact with the human body, it causes irritating and even death results. As a result, various metals are used to provide isolation in x-ray tubes.
There are two secure protection options. The first of these is a special protective plaster, which has a few disadvantages compared to the other. the other is lead, which provides the best and full protection without any disadvantages.
Quality Principles in Lead Board Production
* Raw Material Source Lead Plate is obtained by rolling the lead ingot with a purity of at least 99.97% by passing it through a cylinder with heat and pressure. Lead ingots used in Lead Ingot production are mostly manufactured from scrap batteries in Turkey. Lead is not produced from lead ores found in nature in Turkey. 95% of Turkey’s lead production is obtained from the recycling of scrap batteries.
* Types of Raw Material Production In the recycling of scrap batteries into lead ingots, the scrap battery is melted in a reverber or rotary furnace.
* Corrosion Problem of Lead Plate Lead element is in the class of stainless metals due to its chemical and physical properties. The corrosion problems of lead plates in the market over time arise from the production techniques and the method of manufacture of the raw material used in production. Lead ingot used in the raw material of lead plate is produced in doner kilns and reverberatory furnaces. In order to produce lead ingots in the rotary kiln, pig shavings are used for the chemical decomposition and reduction of metals. The source of rusting is that these shavings molecules remain in the lead element and the iron element mixed in this lead is corroded in the lead. For this reason, the lead ingot used in the production of lead plate must be manufactured from the lead ingot produced in the reverberatory furnace.
Bullet